Bubbling Spa Bench

Quickstart

1. Craft a 10x10 Bubbling Jacuzzi placer item and a Jacuzzi Cover using the recipes below.
2. Find (or clear) a flat, open 10x10 area with at least 3 blocks of headroom.
3. Use the jacuzzi placer item on the ground to build the spa.
4. Right-click the spa to toggle the bubbles on or off.
5. Use a Jacuzzi Cover on the spa to close it up, or take the cover off to reopen it.
6. Hop in with friends and relax!

Overview

Bubbling Spa Bench adds a fully functional, multiplayer-friendly jacuzzi you can build anywhere you have room. Once placed, the spa bubbles with water particles and ambient splashing sounds, has built-in seating around its edges, and can be covered up when not in use.

What It Adds

• 10x10 Bubbling Jacuzzi — a placeable item that builds a large in-world spa structure.
• Jacuzzi Cover — a craftable cover that closes and protects the spa when it's not bubbling.

How To Use

• Placing the spa: Use the jacuzzi placer item on a block. The mod checks for a clear 10x10 area with 3 blocks of headroom above the spot. If the space isn't clear, you'll get a message asking for more room.
• Toggling bubbles: Right-click anywhere on the spa to turn the bubbling water effect on or off. When bubbling, you'll see water particles and hear splashing/filling sounds around the tub.
• Covering the spa: Use a Jacuzzi Cover directly on the spa to install it. This automatically turns off the bubbles and disables sitting until the cover is removed.
• Uncovering the spa: Interact with a covered spa to remove the cover — it pops back into your inventory as an item, and the spa becomes usable again.
• Sitting: The spa has multiple seating spots around its rim where players can sit and soak together, as long as the spa isn't covered.

Crafting And Obtaining

Craft the placer and cover at a crafting table:

Abilities And Mechanics

• The spa occupies a 10x10 footprint with a comfortable vertical interaction space, so it fits neatly under roofs or in enclosed rooms without swallowing extra ceiling space.
• Bubbling mode produces looping water wake particles across the tub's surface along with periodic filling and splashing sounds for atmosphere.
• Covering the spa is a toggleable state: bubbles automatically stop and seating is disabled while covered, and everything resumes normally once the cover is taken off.
• Spa placements are remembered, so bubbling and cover states persist even after leaving and returning to the world.

Progression And Strategy

There's no combat or survival progression tied to this mod — it's a social and decorative feature. Use it as a relaxation spot in a build, a multiplayer hangout area, or a themed room in a spa, resort, or house build. Since each spa takes a full 10x10 footprint, plan builds with enough open space (and headroom) before placing one, and keep a Jacuzzi Cover handy to protect the spa or change its look when it's not actively in use.